Documentation Center

Viz Artist

Version 3.11.0 | Published January 22, 2018 ©

Wall

images/download/attachments/30114126/Wall.png

The wall object is a curved wall. The size and curving of the wall can be customized.

Note: This plug-in is located in: Built Ins -> Geom plug-ins -> Default

This section contains the following topics:

Wall Properties

images/download/attachments/30114126/bipwalledit.png

  • Use LOD: Enables/disables dynamic level of detail.

  • Height: Sets the height of the wall.

  • Width: Sets the width of the wall.

  • Depth: Sets the depth of the wall curving. The higher this value is set, the more curved the wall will show.

  • Angle: Sets the angle of the walls curving. Use this parameter together with Depth: To achieve the wanted curving of the wall.

  • Corners: Sets the number of internal corners the wall should be built up from.

  • Center: Sets the center axis of the object. Choose between Center, Bottom or Top.

  • Front: Lets you switch between front and back.

To Create a Wall

images/download/attachments/30114126/bipwall_example.png

  1. Create a new group and add the Wall plug-in to it.

  2. Open the Wall editor and set the following parameters:

    • Set Height to 200.0.

    • Set Width to 400.0.

    • Set Depth to 400.0.

    • Set Center to Center.

  3. Add a material and/or a texture to it.

  4. Open the Transformation Editor and set Rotation Y to -45.0.