Jack Properties

Time mode has the following properties:

• Hour format: Sets how to show hours (either off, on or with a leading zero if the value is less than 10).

• Min format: Sets how to show minutes (see Hour format).

• Sec format: Sets how to show seconds (see Hour format).

• Hour/Min separator: Sets character separation for hours and minutes.

• Blink mode: If set to on the separator between hours and minutes will blink, this means - every odd second it will be turned off.

• Min/Sec separator: Sets a separator for minutes and seconds.

  Note: Although a format is switched off, the separator will still be shown.

• am/pm or 24 hours: Switches between the am/pm and 24 hour format

• Time/meridian separator: Sets a separator for the am/pm hour format.

• am/pm format: Sets the case of am/pm to upper or lower.

• Hour correction: Enables you to correct the hour value of the system time. Useful to show the local time of a location in a different time zone.

• Min correction: Sets correction value for minutes (see Hour correction).

• Sec correction: Sets correction value for seconds (see Hour correction).

  

  Date mode has the following properties:

• Year format: Sets how to show the year format (off, 2 digits or 4 digits, please keep in mind that in the year 10000 this will be 3 digits or 5 digits, due to the algorithm used).

• Month format: Sets how the month is shown, either off, on or with a leading zero from January to September.

• Day format: Sets how the day is shown (see Month format).

• First separator: Sets the separator character for the first two items of the date. If the dot value is selected an additional blank character will be inserted automatically.

• Second separator: Sets the separator character for the last two items of the date.

• Order: Sets the order of the items of the date.

• Year correction: Sets a correction value for the year.

• Month correction: Sets a correction value for the month.

• Day correction: Sets a correction value for the day.