ACCESSORIES

TAKE_NEXT

(*)

AUDIO

FADE_MANUAL

Toggle fade manual.

FADE_OUT_KEEPS

Fader rate

Faders that are set as "keep level" in the template On Air are faded out. Will also work when new templates have been taken in between the 'keep' action and the FADE_OUT_KEEPS.

FADE_DOWN SECONDARY_AUDIO

Fader rate

Viz Mosart fades down relevant audio sources not connected to the video currently On Air.

FADE_UP SECONDARY_AUDIO

Fader rate

Viz Mosart fades up relevant audio sources not connected to the video currently On Air, when cutting between sources.

SET_LEVEL_2_ONAIR

-

The second level for faders in the template which are On Air are set.

SET_LEVEL_2_PREVIEW

-

The second level for faders in the template are set on the template which is in preview, and be performed on next transition.

FREEZE_AUDIO

-

All sound faders are frozen, and do not respond to commands from templates. This command is a toggle function, and is thus NOT suited for use from a template.

AUTOTAKE

N/A

(*)

AUTOTRANS

PP, ME1, ME2, ME3, ME4

MixEffect (MIX OR WIPE) + Transitionrate

For example: MIX 33, WIPE 10.

AUX, Default

(*)

CROSSOVERCOMMAND

N/A

(*)

DEVICE_PROPERTY

CAMERA CONTROL

See next column.

When the DEVICE_PROPERTY control command is used with the value 'CAMERA CONTROL', only setting speed (Camerobot) and presenter (Camerobot/FxMotion) are controllable from a template.

Details for Camerobot Presenter:

ANCHOR=pos1:presenter1[,pos2:presenter2]…

The position and presenter is given as a pair divided by ‘:’.

Multiple position-presenter pairs are possible, separated by ‘,’.

Details for Camerobot Time:

If Time =1 (>0), Viz Mosart sends MATRIX_MOVE_MPOS command to Camerobot,
while if Time = 0 Viz Mosart sends MATRIX_CUT_MPOS command Camerobot.

AUDIO

demands <fields> structure as parameter with
parameter1=AUDIO,
parmeter2=key,
parameter3=value
OR
connectionstring style

DEVICE_STANDBY

AUDIO_MIXER, GPI, LIGHTS, LOUDNESS, ROUTER, SOUND_PLAYER, SUBTITLING, VIDEO_SERVER, VIDEO_SWITCHER, VIDEO_WALL, VIRTUAL_SET, WEATHER

ON

OFF

TOGGLE

ON: The device chosen (in Value) is put in Standby.

OFF: The device chosen (in Value) is taken out of Standby.

TOGGLE: The Standby status (ON/OFF) of the device chosen (in Value) is toggled.

(If there are several devices of the chosen kind (e.g. video servers), all of them are affected.)

DEVICE_STANDBY

GRAPHICS (full-screen)

As above (ON/OFF/TOGGLE)

OR

engineno:[ON|OFF|TOGGLE]
(Example: 2:TOGGLE)

ON/OFF/TOGGLE: As above, applied to all graphics engines.

If an engine number is given, only the designated engine is affected.

DEVICE_STANDBY

ROBOTIC_CAMERA

As above (ON/OFF/TOGGLE)

OR

controller:[ON|OFF|TOGGLE]
(Example: 1:ON)

OR

controller:camera:[ON|OFF|TOGGLE]
(Example: 1:2:ON)

ON/OFF/TOGGLE: As above, applied to all cameras on all controllers.

If a controller (but no camera) is given, only the cameras on the designated controller are affected.

If both a controller and a camera is given, only the designated camera is affected.

DEVICE_STANDBY

OVERLAY_GRAPHICS

As above (ON/OFF/TOGGLE)

OR

Engine No:[ON|OFF|TOGGLE]

For example:
2:TOGGLE: Toggles Engine 2 Standby status)

ON/OFF/TOGGLE: Applied to all overlay graphics (all controllers and corresponding engines).

If an engine number is given, only the designated engine is affected.

DIRECTTAKE

The Recall Nr (see Template Properties) of the direct take template to execute

-

Executes the direct take template given by Value.

DVE

FORWARD

REVERSE

Recall forward/reverse EMEM

n/a

ENABLE_GRAPHICS_
MIRRORING

n/a

(*)

FULLSCREEN_GRAPHICS

CONTINUE_FULLSCREEN

AUTO

Continue Command Only: The AUTO parameter will replace the continue command with the number of continue points in the graphics item.
The number of continue points is taken from the graphics_continuecount field.

Examples:
AUTO+1: The number of continue counts from the graphics + 1
AUTO-2: The number of continue counts from the graphics - 2

FULLSCREEN_GRAPHICS

CONTINUE_FULLSCREEN

Engine no

The target output fullscreen engine number to execute the action on. (e.g. 1,2,3 )

MACRO

Engine no : macro

The target output fullscreen engine number to execute the action on. (e.g. 1,2,3 ) and Macro name.

The engine number must be same as the number defined in AV Automation

GRAPHICSPROFILE

N/A

-

HOLD_AUDIO_
TRANSITION

N/A

-

HOLD_VIDEO_
TRANSITION

N/A

-

LIGHT

N/A

(*)

MARKER

N/A

(*)

NCS

START_STATUS,

STOP_STATUS

RUNDOWN

STORY

ITEM

Specific for Open Media

NEXT_CUE_DELAY

EXTEND

A number of frames

If there is a pending cue (when this control command is executed), this cue is postponed by the number of frames given.

Otherwise (no pending cue), the next cue operation will be additionally delayed by the number of frames given. (I.e., the value will be added to the sum of the settings

• Min. Cue delay in AV Automation Devices Vision Mixer

• Next cue delay in Audio and Video Setup, Vision Mixer Effects Configurations, Settings (if an effect is involved)).

OVERLAY_GRAPHICS

CLEAR

Destination or Render (Engine no.)

Destination or Render (Engine no.) to clear the graphics from.

Numerical value: Render (Engine no.)

Non-numerical value: Destination.

CONTINUE

Engine no

TAKE_MANUAL_OUT

Destination or Empty

Destination to take out the graphics from.

Non-numerical value: Destination

Empty or Numerical value: Takes out all the graphics

MACRO

Engine no : macro

For example: 4:macrohere

PRETAKE_NEXT_OVERLAY

Render (engine no)

TAKE_NEXT_OVERLAY,

TAKE_NAMED_OVERLAY

(*)

OVERLAY_TO_MANUAL

Parameter 1: ONAIR (default), PREVIEW.

Parameter 2: Comma-separated list of handler names

Parameter 3: AUTOMATIC (default) / MANUAL

Parameter 2 and Parameter 3 must be separated by a semicolon. (E.g. WALL,DSK;MANUAL.)

For more details, see Viz Mosart User Interface > Keyboard Shortcuts > Control Command Keys > OVERLAY_TO_MANUAL in the Viz Mosart User Guide).

PLAY_STORY

N/A

(*)

RECORD

PREPARE,

START,

STOP

Split parameters using,

- first: clipname,

- second: recorder (optional),

- third: port name (default Rec),

- fourth: group name (default Rec)

For example: clip33,recorder1,Rec,Rec

RELEASE_BACKGROUND

N/A

(*)

RUNDOWN_NCS_
RESYNC

N/A

(*)

SEQUENCE

LOOP

-

Sets a running sequence to start looping

STOP_LOOP

-

Stops running a looped sequence in loop

STOP

-

Stops a running sequence

START

-

Restarts a previously stopped sequence

SET_AUX_CROSSPOINT

N/A

(*)

SET_CROSSPOINT

PP, ME1, ME2, ME3, ME4

AUX

Default

bus (A,B,C,D) : xpoint

If layers are supported by the driver (e.g. vizrt-ips) it is possible to also specify the layer (A,B,C,D) in addition to the crosspoint.

Two arguments are supported separated by semicolon. First parameter is crosspoint, the second is layer.

If no semicolon is used the value is interpreted as crosspoint only and bus A is used.

Example: B:CAM2

SET_CURRENT_ME

PP, ME1, ME2, ME3, ME4

AUX

Default

(*)

SET_VIDEOSERVER_
SALVO

Select a configured video server from the list

-

These same settings are available as keyboard shortcuts, as presented in the Viz Mosart User Guide, under section Viz Mosart User Interface.

STUDIOSETTUP

#

-

SWITCH_GRAPHICS_
MIRRORING

TOGGLE,

ACTIVATE,

DE-ACTIVATE

-

For standard and Story Recorder (SR) shows.

SWITCH_GENLOCK_MODE

TOGGLE,

ACTIVATE,

DE-ACTIVATE

Story Recorder (SR) specific:
As long as some standard show elements are not supported with SR, use this command to control the use of Genlock mode.

SR can only run in Genlock mode.

SWITCH_REHEARSAL_MODE

TOGGLE,

ACTIVATE,

DE-ACTIVATE

Story Recorder (SR) specific:
SR can only run with Rehearsal mode deactivated, use this command to ensure Rehearsal mode is not accidentally active.

SWITCH_VIDEOSERVER_
MIRRORING

N/A

-

For standard and Story Recorder (SR) shows.

This command has no parameters, it simply acts as a toggle.

TAKE_CONTINUE_POINT

N/A

(*)

TAKE_SERVER_TO_
PROGRAM

N/A

transRate (integer) - parameter.

(*)

Takes a video server port to program on a selected ME. For example: a video clip is running on a video wall.
The shortcut can then be used to take the last used/active video server to program.

TRANSITION_TYPE

CUT,

MIX

Rate

EFFECT

Effect no

TOGGLE

(*)

UNKNOWN

N/A

Default fallback. Does nothing.

VIDEO_PORT

N/A

Must be a comma separated list in the format:

command,port,parameter

For example: PLAY_PAUSE,A,PLAY.

For more details, see Viz Mosart User Interface > Keyboard Shortcuts > Video Port Control Commands > OVERLAY_TO_MANUAL in the Viz Mosart User Guide).

VIDEO_SERVER_GOTO

N/A

(*)

VIDEOWALLMODE

N/A

(*)

WEATHER

N/A

(*)