Documentation Center

Tracking Hub

Version 1.1.1 | Published April 03, 2018 ©

Configure the Studio

This section details how to configure the Virtual Studio.

images/download/attachments/28381082/setup_studio_menu.png

  1. Click Open to select a previously saved studio configuration, or create a new configuration by clicking Save As.

  2. Set the Frequency frame rate:

    • 50 Hz

    • 60 Hz

    • 59.94 Hz

  3. Set the Synchronization base:

    • Freerun: No synchronization. Tracking Hub runs using its own time base, corresponding with the configured frequency. Should not be used in production environments.

    • AV-Card: For Plura PCL-PCI and PCL-PCIe sync cards.

    • Viz Engine: Synchronized with Viz Engine, running on the same computer.

  4. Go to Configure Topology.