Configuration Panel

The Configuration Panel is used to save and load Studio configuration profiles, select modes of operation including frequency, and to set some user interface options.

graphics/setup_studio_menu.png

Menu options:

  • Open: Open a Tracking Hub configuration file. The name of the currently loaded configuration file will always be displayed in the top bar, between the application’s name and main menu.

  • Save: Save the current Studio configuration.

  • Save As: Save the current Studio configuration with a new name.

  • Reset: Reset the current Studio configuration. Note that the loaded configuration file is only changed if save is clicked after resetting the configuration.

  • View Log: Open or close the Log Panel.

  • View Timing Analysis: Open the Timing Analysis Window.

  • Frequency: Select the production frequency; 50 Hz, 60 Hz or 59.94 Hz.

  • Synchronization Mode: Select synchronization mode for the Tracking Hub:

    • Freerun: No synchronization. The Tracking Hub uses its own time base, corresponding with the configured frequency.

    • AV-Card: Synchronization is done by an installed Plura card.

    • Viz Engine: Synchronized with Viz Engine, running on the same computer.

    Tip: If the selected synchronization mode is followed by a red box with a white horizontal line, this indicates synchronization issues.

See Also

Copyright © 2016 Vizrt