To set up the default Viz Mosart audio player

1. On the machine that will be used for the audio player, open the Viz Mosart installation folder and locate the Audio Player installer file, named something like
   VizMosartAudioPlayer-5.0.2.32554.msi

2. Install Audio Player, then start it.

3. On the Viz Mosart server, open AV Automation.

4. Go to Devices > Preferences > Audio > Sound player.

5. Check Use sound player and choose from the players in the drop-down list.
   
   

6. Under Host write the IP address to the computer where audio player is running.

7. Under Default directory, write the folder path where the audio files are stored.
   
   

   

8. Restart AV Automation and check that the connection is green.
   

   

To set up a SpotOn audio player

This procedure prepares a SpotOn audio player.

1. Download, install and start the device software to a host machine available to the Viz Mosart server.

2. In AV Automation, go to Devices > Preferences > Audio > Sound player.

   1. Check Use sound player.

   2. Choose SpotOn Audio Player from the players in the drop-down list.
      
      

   3. Under Host write the IP address to the machine where the SpotOn player is running.

   4. Click Save & Close.

3. Restart AV Automation and check that the connection is green.
   

   

To set up a TriCaster audio player

1. Start the TriCaster on a host machine available to the Viz Mosart server.

2. In AV Automation, navigate to Devices > Device Properties > Audio (tab) > Sound player (tab).

   1. From the drop-down menu to the right of Use sound player, select vizrt-ips.

   2. In the Host field, enter the hostname or IP address of the TriCaster host.

   3. In Default directory, enter the sound clips directory on the TriCaster machine (for example, C:\ProgramData\vizrt\Media\Sound and Music\Sample\www.SoundTraxxMusic.com).

      Note: The current implementation enables playing of files from only a single folder.

   4. Click Save & Close.

3. Restart AV Automation and make sure you have a green connection (as in the SpotOn audio player example above).

4. In AV Automation, navigate to Template Editor > Template > New.

5. Choose an appropriate template, right-click in the dark grey area to the left and select Enable > Audio player.
   

6. In AUDIO FILE, enter an existing file name.
   
   These can be browsed in the SOUND tab on the TriCaster (in this example, Inspire.mp3).
   

   Note: The OUTPUT field is ignored, as the TriCaster has a single output.

7. On the template, click OK.

Viz Mosart Audio Player UI

Audio Player Settings

• Click the menu bar Settings to open the settings dialog.
  

  

Testing panel

Opens a panel for testing the functionality of the selected Audio Player.

File already playing behavior

Controls what the Audio Player does if a new file is played when a file is already playing.

Outputs

The list on the left shows all the outputs, and the list on the right shows available playback devices on the computer. The line between them shows playback device mapping.

• Click an output to map to playback device.

• Click New to add an output.
  

  

• You can rename or delete an output.

Audio Player Configuration File

The Audio Player Configuration file Mosart Audio Player.exe.config is at

%ProgramFiles(x86)%\Mosart Medialab\Mosart Audio Player\.

• Change the baseAddress attribute to use another port:

SpotOn Audio Player

Addressing an audio file that is stored in a SpotOn client is similar to the default player method above, but the file identifier is different.

• LEVEL: This value does not affect the audio fader that is taken to Program. Instead a special command option is offered. Set LEVEL to -90 to send a STOP (playing audio) command. All other values are ignored.

• OUTPUT: Enter the panel button number to identify the associated sound file (in this example "2a").

  Tip:

  Use the button number (mapped to OUTPUT) as reference (instead of the audio file name). You can then replace the audio file assigned to a button (for example, when a show is rebranded and new music selected) and still keep the same template information.
  This avoids having to change the file name.

• AUDIO FILE: Enter the panel button name here (in this example 0452_32Bit).
  

  

See also

• Audio in AV Automation Devices

• Playing Audio in the Viz Mosart User Guide (user actions).