Gateway Configuration for Viz Pilot

Gateway Configuration for Viz Trio

Database Settings

For Viz Pilot and Viz Trio, these settings are available under the VCP Database tab.

• Connection string: Sets the connection to the database.

  Note: Use the following string format: user-name/password@database.

• Schema: Shows the name of the Oracle schema.

  Note: The Schema name is case-sensitive, typically given in uppercase.

  

Gateway Connection

For Viz Pilot and Viz Trio, these buttons are available under the MOS tab.

• Start: Starts a connection to Gateway server.

• Stop: Close a connection to Gateway server.

• Restart: Restarts a connection to Gateway server.

Gateway Connection Configuration

For Viz Pilot and Viz Trio, these settings are available under the MOS tab.

• Automatic reconnect: Starts the Gateway connection automatically when starting or resetting the Media Sequencer.

• Reconnect interval (sec): Specifies the number of seconds that the Media Sequencer should wait, when the connection is lost, before trying to reconnect to Gateway.

• Gateway Host: Shows the IP address of the Gateway host.

• Gateway Port: Shows the port number on the Gateway host.

  Note: MOS ID and NCS ID should be left empty for Gateway version 2.0 or newer.

• Send item stat: Sends feedback to the NCS via MOS, for example information about the transfer status of elements.