Viz Engine Administrator Guide

Version 4.2 | Published December 04, 2020 ©

HP Z440

This section describes how to setup a HP Z440 machine with the different cards provided by Vizrt. The HP Z440 (4U rack units) is a high performance single-CPU workstation with 8 memory slots, multiple storage and PCIe configuration options. More details about the HP Z440 can be found on HP’s website: HP Z440 Info.

images/download/attachments/54025782/hp_z440_gf.jpg
HP Z440 with NVIDIA K6000 card, Matrox X.mio2 (legacy):

images/download/attachments/54025782/hp_z440_k6000x.jpg

HP Z440 PCI/PCIe Slot Layout and Usage

Slot #

Type

Used for

13

PCIe2 x1

AES Audio card (if the video card has it)

14

PCIe3 x16

Graphic card

15

PCIe2 x4

Unused/Free

16

PCIe3 x8

Video Card (Matrox, or Bluefish)

17

PCIe3 x16

Radial Aerator, if needed, see note below

18

PCI 32/33

Unused/Free

Z440 BIOS Settings

  • Advanced – Power Options – Fan Idle Mode

    • Default is two steps below maximum: **

    • Fan can be set to maximum, if temperatures are high.

Memory Expansion

Memory expansions must follow the predefined fill-order and memory-type requirements. There is a table documenting the memory fill order inside the server cabinet. Refer to that table when adding memory modules. Memory configurations with more than four memory DIMMs installed, require the HP Z440 Memory Cooling Solution (AMO kit P/N J2R52AA). This fan can be obtained from Vizrt, or directly from HP.