This section details how to configure Viz Virtual Studio.

1. Click Open to select a previously saved studio configuration, or create a new configuration by clicking Save As.

2. Set the Frequency frame rate. Available options are:

   • 50 Hz

   • 60 Hz

   • 59.94 Hz

   • 30 Hz

   • 29.97 Hz

   • 25 Hz

   • 24 Hz

3. Set the Synchronization base:

   • Freerun: Does not synchronize. Tracking Hub runs using its own time base, corresponding with the configured frequency. This option should not be used in production environments.

   • AV-Card: Synchronizes using Plura PCL-PCI or PCL-PCIe sync cards.

   • Viz Engine: Synchronizes with a Viz Engine running on the same computer.

4. Go to Configure Topology.