Configure the Studio

This section details how to configure the Virtual Studio.

1. Click Open to select a previously saved studio configuration, or create a new configuration by clicking Save As.

2. Set the Frequency frame rate:

• 50 Hz

• 60 Hz

• 59.94 Hz

3. Set the Synchronization base:

• Freerun: No synchronization. Tracking Hub runs using its own time base, corresponding with the configured frequency. Should not be used in production environments.

• AV-Card: For Plura PCL-PCI and PCL-PCIe sync cards.

• Viz Engine: Synchronized with Viz Engine, running on the same computer.

4. Go to Configure Topology.

See Also

• Configure Topology

• Set a Delay

• Set an Offset

• Analyze Time

• Lens Range Calibration

• Modify a Rig